‘D’ Handle Only for Fencing Spade
- Replacement ‘D’ Handle for the Strainrite short and long handle spade
- Redesigned for durability
- Ergonomic Grip ‘D’ Handle
- Made in New Zealand
Showing 1–40 of 102 results
4 Arm Post Driver – 150mm
- Four handles – can be operated by 2 people simultaneously.
- Reduced transfer of shock back through the handles to operator’s hands
- Inside diameter 150mm (6″) nominal
- 800mm Length (31 1/2″)
- Weight 31kg
Ace Of Spades Long Handle – 1420mm
- Premium quality NZ made fencing spade
- Tough Heat Treated Steel Blade
- Additional tube in shaft for increased strength & balance
- Slightly rounded spade mouth and solid handle
- Shaft Diameter 33mm
- Overall Length 1420mm
- Spade Head Width 170mm
- Spade Head Height 240mm
Ace Of Spades Short Handle – 1220mm
- Premium quality NZ made fencing spade
- Tough Heat Treated Steel Blade
- Additional tube in shaft for increased strength & balance
- Slightly rounded spade mouth & solid handle
- Spade Head Width 170mm
- Shaft Diameter 33mm
- Spade Head Height 240mm
- Overall Length 1220mm
Adjustable Batten Clamp
- A truly hands-free batten holder that attaches quickly and easily.
- Built tough to last
- Adjustable for all common batten sizes.
- Gold passivated for increased corrosion protection.
Bahco Wire Cutter
- High performance handles with superior grip
- Induction-hardened precision cutting edges
- Forged with cutting edges for piano, hard and soft wire
- High leverage giving exceptional cutting performance with minimum effort
- Scalloped jaw design
- Made in Spain
Batten Holder
- Staple battens to a strained fence without leaning over wire
- Adjustable lever position
- Left or right-handed operation
Batten Square
- Enables fast batten positioning; vertically & square
- Designed to minimise wind resistance
- Lightweight, long-lasting aluminium
- Use with Bungy Batten Spacer
Bungy Batten Spacer
Evenly space battens between posts.
Preset yellow mould to 5 battens per post
Utilises Solcor Solid core bungy
Ideally used with Strainrite Batten Square
Crimp Sleeves 2.5mm – Container of 1000
- 2.5mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 1.6mm to 2.5mm fencing wire
- Container of 1000
Crimp Sleeves 2.5mm – pottle of 100
- 2.5mm Wire Crimp Sleeves
- Water resistant grit adhesive for all weather application.
- For use on 1.6mm to 2.5mm fencing wire.
- Pottle of 100
Crimp Sleeves 2.5mm – Pottle of 500
- 2.5mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 1.6mm to 2.5mm fencing wire
- Pottle of 500
Crimp Sleeves 3.15mm – Container of 1000
- 3.15mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.15mm or 10 gauge and 1.6mm High Tensile Barbed Wire
- Container of 1000
Crimp Sleeves 3.15mm – Pail of 500
- 3.15mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.15mm or 10 gauge and 1.6mm High Tensile Barbed Wire
- Pail of 500
Crimp Sleeves 3.15mm – Pottle of 50
- 3.15mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.15mm or 10 gauge and 1.6mm High Tensile Barbed Wire
- Pottle of 50
Crimp Sleeves 4.00mm – Container of 1000
- 4.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.55mm to 4.0mm (9 to 8 gauge) Fencing Wire and 2.0mm High Tensile Barbed Wire
- Container of 1000
Crimp Sleeves 4.00mm – Pottle of 50
- 4.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 3.55mm to 4.0mm (9 to 8 gauge) Fencing Wire and 2.0mm High Tensile Barbed Wire
- Pottle of 50
Crimp Sleeves 5.00mm – Container of 1000
- 5.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 4.5mm (7 SWG) fencing wire or 2.5mm (12½ SWG) mild steel barbed, woven wire and 4mm Bayco Wire.
- Container of 1000
Crimp Sleeves 5.00mm – Pottle of 50
- 5.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all-weather application
- For use on 4.5mm (7 SWG) fencing wire or 2.5mm (12½ SWG) mild steel barbed, woven wire and 4mm Bayco Wire.
- Pottle of 50
Crimp Sleeves 5.00mm – Pottle of 500
- 5.00mm Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all-weather application
- For use on 4.5mm (7 SWG) fencing wire or 2.5mm (12½ SWG) mild steel barbed, woven wire and 4mm Bayco Wire.
- Pottle of 500
Crimp Sleeves Barbed Wire – Pottle of 50
- Barbed Wire Crimp Sleeves
- Water Resistant Grit Adhesive for all weather application
- For use on 2.50mm (12 gauge) Mild Steel Barbed Fencing Wire
- Pottle of 50
Crimp Sleeves Electric – Container of 1000
- 2.5mm Electric Crimp sleeves
- For use on 1.6mm to 2.7mm (16 to 12.5 gauge) Fencing Wire
- Crimp 4-5 times with Eze-Crimp or Ultra-Crimp Fencing Tool to ensure joint strength
- Container of 1000
Crimp Sleeves Electric – Pottle of 50
- 2.5mm Electric Crimp Sleeves
- For use on 1.6mm to 2.7mm (16 to 12.5 gauge) Fence Wire
- Crimp 4-5 times with EzeCrimp or UltraCrimp Fencing Tool to ensure joint strength
- Pottle of 50
Double Digger
- Cuts digging time in half
- Slightly tapered hardwood handles.
- Stainless Steel Blades
- Overall Length 1800mm (70″)
EzeCrimp 3in1 Fencing Tool
The original EzeCrimp crimping and electric fencing tool for wire cutting, wire stripping and wire joining.
- Hardened cutlery grade steel jaws
- Lightweight and compact
- Comfortable rubber grips
- Strong double action with an over-centre lever for superior strength crimps
Compatible with Strainrite Crimp sleeves Only
- 2.50mm Crimp Sleeves
- 3.15mm Crimp Sleeves
- 4.00mm Crimp Sleeves
- 5.00mm Crimp Sleeves
- Electric Crimp Sleeves
- Barbed Wire Crimp Sleeves
Note: Using 3rd party crimp sleeves will void your tools warranty
Ezecut Fencers Chisel
- Contractors Choice High-Quality Fencing Chisel
- Forged from Solid High Carbon Steel
- 37mm Head
- Surface Ground and Whetstone Sharpened.
Maintain your Ezecut Fencers Chisel by cleaning up / grinding the strike point on the handle removing any ragged edges.
Never use a chisel whose head has been allowed to mushroom. striking the chisel in this condition could harm you, or others with chips of metal flying off the handle.
EzeMate Chain Diverter
- Easily fitted to any chain strainer
- Unbreakable Galvanized Steel Construction
- Create room to work & prevent tool damage
EzePull 4in1 Fencing Tool
The original EzePull fencing tool for staple pulling, wire cutting, wire stripping and wire joining.
- Hardened cutlery grade steel jaws
- Lightweight and compact
- Comfortable rubber grips
- Strong double action with over-centre lever for superior strength crimps
Compatible with Strainrite Crimp sleeves ONLY
- 2.50mm Crimp Sleeves Only
Note: Using 3rd party crimp sleeves will void your tools warranty
Fastlok Wire Joiners – Pottle of 20
- For 2.50mm (12 1/2 gauge) High Tensile Wire
- No tools required
- Reusable
- Pottle of 20
Fencer’s Crowbar
- Length 1.8M (70″)
- 22mm in diameter
- Ideal for digging, levering and loosening the soil in holes and trenches.
- Hot Forged & Heat Treated Spring Steel Crowbar
- Offset flat chisel end enables greater control
- Ideal weight & balance for sustained use
- Colour RED
Gudgeon Guide
Well Hung Gates Everytime
Easily lines up against your fence post, acting as a jig. The guide allows your drill to make perfect gudgeon holes, set in the right place every time. Perfect for novices through to contractors.
Free up your hands
Using the chain hook to support the top guide and the adjustable bungee for the bottom guide, we give you the flexibility to free up both hands to install the chain clamps, allowing you to set your gate height in position with ease.
New Zealand Made
Proudly 100% New Zealand designed and manufactured, ensuring you get the Strainrite Quality every time.
Harpoon Ground Anchor
- Fast installation with a mechanical post driver
- Provides immediate high load carrying capacity
- Designed for use in tough rocky ground
- Ideal for use in vineyards using Klima cane pruning equipment
- Patent Pending
Heavy Duty Post Chisel
- General Purpose Fencing Chisel
- Forged from Solid High Carbon Steel
- 45mm (1 3/4″) Head
- Milled Cutting Edge
Heavy Duty Stay Holder
- Quality Heavy Duty Strainrite HD Stay Holder
- Manufactured from Heavy Gauge Galvanized Steel
- Gold Passivated for increased corrosion protection
- Suitable for angle/horizontal rails
- Also avaliable in boxes of 25 FFP00045
Joule Shield Steel Post Pinlock Insulator
Strainrite’s premium range of Joule Shield™ Insulators. Featuring the multi-shield design. This allows for a greater surface area and shielding for minimised power leakage.
PROVEN 100% GREATER INSULATION THAN OTHER TESTED INSULATORS
- Computer aided designed twin pinlock provides a strong accurate fit for locking.
- Reinforced web bracing and thicker walls providing structural strength.
- Rounded surfaces that shed water faster.
- Joule Shield™ Twin shield flange for increased insulation performance.
- Long-life UV stabilised plastic.
- Proudly designed and manufactured in NZ.
- 12 Year Guarantee.
KNIPEX Cobra Hightech Water Pump Pliers – 250mm
- Push the button for adjustment on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping
- Box-joint design for high stability due to double guide
- Reliable catching of the hinge bolt: no unintentional shifting
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, multi stage oil-hardened
KNIPEX Cobra Hightech Water Pump Pliers – 300mm
- Push the button for adjustment on the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping
- Box-joint design for high stability due to double guide
- Reliable catching of the hinge bolt: no unintentional shifting
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, multi-stage oil-hardened
KNIPEX Ergo Combo Plier
- Same features as the Knipex Std Combo Plier
- 35% greater leverage than standard pliers of the same length
- Two colour ergonomic dual component handles
- Polished, high grade tool steel head, oil hardened and tempered
- Long cutting edges for thicker cables
KNIPEX Plier Wrench – 250mm (10″)
- Gripping plier & wrench in a single tool
- Unique cam action ratcheting system
- Instant adjusting memory button
- Adjustable tightening tool
- Excellent for gripping, holding, pressing and bending work pieces
- Replaces the need for sets of metric and imperial spanners
- Smooth jaws for damage free installation of plated fittings
KNIPEX Plier Wrench – 300mm (12″)
- Gripping plier & wrench in a single tool
- Unique cam action ratcheting system
- Instant adjusting memory button
- Adjustable tightening tool
- Excellent for gripping, holding, pressing and bending workpieces
- Replaces the need for sets of metric and imperial spanners
- Smooth jaws for damage free installation of plated fittings