Showing 1–40 of 43 results
Press formed steel strainer board
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Overall height – 1320mm (52″)
*900mm Strainer Board Image used
NOTE: Strainer boards are galvanised finish, not gold passivated as shown.
Press formed steel strainer boards
Compatible with most mesh, hinged & ring joint netting
Features the wedge clamp design
Set includes
2 x 1320mm (52″) Strainer Board – Wedge Clamp
2 x Hook Type Boundary Strainers
NOTE: Strainer boards are galvanised finish, not gold passivated as shown.
Press formed steel strainer boards
Compatible with most mesh & netting
Features the threaded clamp design
*900mm Strainer Board Image used
Press formed steel strainer boards
Compatible with most mesh & netting
Features the Wedge clamp design
Overall Height – 1530mm
*900mm Strainer Board Image used
Press formed steel strainer boards
Compatible with most mesh & netting
Features the threaded clamp design
Set includes
2 x 1530mm Strainer Board – Threaded Clamp
2 x Hook Type Boundary Strainers
*900mm Strainer Board Image used
Press formed steel strainer boards
Compatible with most mesh & netting
Features the wedge clamp design
Set includes
2 x 1530mm Strainer Board – Wedge Clamp
2 x Hook Type Boundary Strainers
Press formed steel strainer board 1900mm (75″)
Compatible with most mesh, hinged & ring joint netting
Features the threaded clamp design
NOTE: Strainer boards are galvanised finish, not gold passivated as shown.
Press formed steel strainer board
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Overall height – 1900mm (75″)
NOTE: Strainer boards are glavanised finish, not gold passivated as shown.
Press formed steel strainer boards
Compatible with most mesh, hinged & ring joint netting
Features the threaded clamp design
Set includes
2 x 1900mm (75″) Strainer Board – Threaded Clamp
3 x Hook Type Boundary Strainers
*900mm Strainer Board Image used
NOTE: Strainer boards are galvanised finish, not gold passivated as shown.
Design press formed steel strainer boards
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Set includes
2 x 1900mm (75″) Wedge Boards
3 x Hook Type Boundary Strainers
*900mm Strainer Board Image used
NOTE: Strainer boards are galvanised finish, not gold passivated as shown.
Press formed steel strainer board 900mm (35″)
Compatible with most mesh, hinged & ring joint netting
Features the threaded clamp design
Design press formed steel strainer boards
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Overall Height – 900mm
NOTE: Strainer boards are galvanised finish, not gold passivated as shown.
Design press formed steel strainer boards
Compatible with most mesh,hinged & ring joint netting
Features the Threaded clamp design
Set includes
2 x 900mm (35″) Threaded Strainer Boards
2 x Hook Type Boundary Strainers
NOTE: Strainer boards are galvanised finish, not gold passivated as shown.
Design press formed steel strainer boards
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Set includes
2 x 900mm (35″) Wedge Boards
2 x Hook Type Boundary Strainers
NOTE: Strainer boards are galvanised finish, not gold passivated as shown.
New & improved chain hook
Usable with any Strainrite Chain Strainer or Boundary Strainer
Enables quick, easy chain attachment for tensioning off strainer posts
Comes Assembled with 1 x Clevis Hook and 2 x 1 Meter Length of Gold Passivated Chain
Complete with a 6-metre chain and D Shackle.
Recommended for use with Netting Fence Strainer Boards.
Do not exceed 600kg load or put pipe over handle of boundary strainer
Features Hook Type
Complete with a 6-metre chain and hook.
Recommended for use with Netting Fence Strainer Boards.
Do not exceed 600kg load or put pipe over handle of boundary strainer
Spare parts available for all genuine Strainrite Chain Strainers
Grab & swivel assembly
Includes 1.2 Metre (39″) chain
To hold claws of Chain Strainer onto chain
Ease of use & one hand operation
Available separately or included with Standard Spring Chain Strainer (FCS00040)
Rugged compact construction
Easy to read scale
Prevents wire damage by using correct tension
Easily fitted to any Strainrite Chain strainer
Recommended Tensions
Recommended Tensions
2.5mm HT Wire
Recommended 135kg (1350N)
Maximum 150kg (1500N)
4.0mm Mild Steel Wire
Recommended 135kg (1350N)
Maximum 250kg (1500N)
We are proud to be the only NZ manufacturer of permanent wire strainers
Cliplock Wire Strainer – Our most well-known Wire Strainer
Smooth clicking action
Easily operated upside down
Oval hole in the spool for joining two wires
Die-cast aluminium spool with a galvanised steel frame
Proudly NZ Made
We are proud to be the only NZ manufacturer of permanent wire strainers
Traditional ratchet and pawl mechanism
The pin can be locked out for freewheel action
Oval hole in the spool for joining two wires
Ability to thread onto wire = less joins
Proudly NZ Made
Easily tie off/staple wire hands free!
Quick and easily tensions either fencing or netting wire around strainer posts
Smooth grip wire clamp prevents wire damage
Overall length approx 678mm (26″)
Handle Pipe Diameter 25.4mm
Used vertically to install the collapsible ladder kit. you cut down the 1m poly pipe to the correct spacing of you fence wire. See Diagram image below.
20 x 1m, 1/2 Nominal Bore Poly Pipes
1 x 50m roll Bayco wire
20 x “D” shackles
20 x 5mm crimp sleeves
Used horizontally across the wire with predrilled holes to line up the Endurance Kit (Sold separately)
10 x 1.5m, 3/4 Nominal Bore Predrill Poly Pipes
UV Stabilised for long service life
Use with the Endurance Pivot Crossing Ladder Kit
Pack of 10
FX2 Fixed Handle Contractor Chain Strainer
Improved casting design for effective grip on wire
Solid, one-piece contractor Handle, 21mm (13/16″) Diameter
Smaller size handle – ideal for frequent/contractor use
Computer Designed Geometry
Strain fence wires quickly & easily
FX2 Fixed Handle Contractor Chain Strainer
Improved casting design for effective grip on wire
Solid, one-piece contractor Handle of 22mm (7/8″) diameter
Smaller size handle – ideal for frequent/contractor use
Computer Designed Geometry
Strain fence wires quickly & easily
Two swivel ends for left/right-hand use
Spring Kit and 1.2m (47″) chain included
Frame designed to maximise spark distance
Easy to operate upside down
Specially moulded insulator nests within the frame to achieve high tensile strainer strength.
Proudly NZ Made
For high voltage fence installations
Integrated strainer & insulator assembly combines high performance with strength
Includes integral power wire connection terminal
Design allows fence re-tensioning without the need to disconnect joint clamps
Genuine NZ Made
Full Length 360mm
Spring Length 254mm
Diameter 26mm
Allows for lift or cordon wire length extension for optimal pruning machine operation
Provides tension protection for Vine trellis wires
Klima-Sureflex Springs incorporate internal length restrictor mechanisms
We are proud to be the only NZ manufacturer of permanent wire strainers
All the features of the Cliplock Permanent Wire Strainer
Provides uniform strainer positioning.
Pre-formed loop & knot
Ability to thread onto wire = less joins
Cost effective & convenient to use
No knots required whatsoever
Removable threaded handle. 21.5mm (7/8”) Diameter
Computer-designed geometry for effective grip on zinc/aluminium fencing wire
Strain fence wires quickly and easily
Contractors Choice
Features Snap Hook
Complete with a 6-metre chain and hook.
Recommended for use with Netting Fence Strainer Boards.
Do not exceed 600kg load or put pipe over handle of boundary strainer
We are proud to be the only NZ manufacturer of permanent wire strainers
Combines features of the Drop Pin and Cliplock wire strainer.
Spring loaded pin.
Cost effective & convenient to use
Proudly NZ Made
Smooth Grip Jaws – effective grip on Zinc/Aluminium fencing Wire.
Large one piece, 1″ diameter handle – easy on hands
Strainrite Chain Strainers are a proven design with hard wearing features that are built tough to last. The smooth grip jaws hold all common sizes of fence wire while minimising wire damage. The claws and grips are a heat treated Spheroidal Graphite cast iron, making them durable for a long service life. The rugged steel handles are gold passivated for protection. Also includes a gold passivated standard tested chain with swivel and heavy duty rivets.
MILD STEEL KG LBS HIGH TENSILE *Chart indicates generic tension recommendations. Tension recommendations may vary by manufacturer. For precise details consult your wire manufacturer for specifications. * US Gauge.
New Sureflex Irrigator Gate Spring With Restrictor Only
Includes Restriction Wire & Irrigator Spring
Available in multiple options for end and inline installation
Provides controlled expansion with maximum length, internal restrictor wires
Sureflex Irrigator Spring Kit
Includes Both JouleShield High Strain End Insulator & Cliplock Wire Strainer
Includes L-Clamps, Restriction Wire & Irrigator Spring
Available in multiple options for end and inline installation
Provides controlled expansion with maximum length, internal restrictor wires
Sureflex Irrigator Spring With Insulator
Includes JouleShield High Strain End Insulator , L-Clamps, Restriction Wire & Irrigator Spring
Available in multiple options for end and inline installation
Provides controlled expansion with maximum length, internal restrictor wires
Sureflex Irrigator Spring With Wire Strainer
Includes Cliplock Wire Strainer, L-Clamps, Restriction Wire & Irrigator Spring
Available in multiple options for end and inline installation
Provides controlled expansion with maximum length, internal restrictor wires
