Showing 1–40 of 403 results
Replacement ‘D’ Handle for the Strainrite short and long handle spade
Redesigned for durability
Ergonomic Grip ‘D’ Handle
Made in New Zealand
Quality Runrite mutton swivel hook/gambrel assembly
11mm (7/16″) Stainless Steel
Built tough to last
Smooth surface finish for easier cleaning
12V 7Ah Battery
Rechargeable
Sealed lead battery
Fits SX34 & SX67 Solar Energizers
Press formed steel strainer board (Board only)
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Overall height – 1320mm (52″)
Galvanised finish
*900mm Strainer Board Image used
Press formed steel strainer boards
Galvanised finish
Compatible with most mesh, hinged & ring joint netting
Features the wedge clamp design
Set includes
2 x 1320mm (52″) Strainer Board – Wedge Clamp
2 x Hook Type Boundary Strainers
*900mm Strainer Board Image used
Press formed steel strainer boards
Compatible with most mesh & netting
Features the threaded clamp design
*900mm Strainer Board Image used
Press formed steel strainer boards
Compatible with most mesh & netting
Features the Wedge clamp design
Overall Height – 1530mm
*900mm Strainer Board Image used
Press formed steel strainer boards
Compatible with most mesh & netting
Features the threaded clamp design
Set includes
2 x 1530mm Strainer Board – Threaded Clamp
2 x Hook Type Boundary Strainers
*900mm Strainer Board Image used
Press formed steel strainer boards
Compatible with most mesh & netting
Features the wedge clamp design
Set includes
2 x 1530mm Strainer Board – Wedge Clamp
2 x Hook Type Boundary Strainers
Press formed steel strainer board 1900mm (75″)
Compatible with most mesh, hinged & ring joint netting
Features the threaded clamp design
Galvanised finish
Press formed steel strainer board (board only)
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Overall height – 1900mm (75″)
Galvanised finish
Press formed steel strainer boards
Compatible with most mesh, hinged & ring joint netting
Features the threaded clamp design
Galvanised finish
Set includes
2 x 1900mm (75″) Strainer Board – Threaded Clamp
3 x Hook Type Boundary Strainers
*900mm Strainer Board Image used
Design press formed steel strainer boards
Galvanised finish
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Set includes
2 x 1900mm (75″) Wedge Boards
3 x Hook Type Boundary Strainers
*900mm Strainer Board Image used
Features:
Three replacement 3 Arm Jenny finger guides
Washers & wing nuts included for instant replacement
No additonal parts required
Sold in a 3 pack only
3:1 Ratio – for every rotation the reel spool rotates 3 times
Reel stabiliser – locks and balances the reel to the fence wire
Capacity for approximately 500m (1640 ft) of polywire or 200m (656 ft) of polytape
High-impacted UV resistant polymer plastic for strength and long life
Use with carrying handle or mounting post
The one-piece moulded spool is self-insulated. Reinforced mag wheel fins provides spool strength
Insulated yellow handled included
Not recommended for use with steel wire
Premium 3:1 Geared Reel (spool rotates 3 turns to 1 handle rotation)
Reel Stabiliser – locks & balances the reel to the fence wire
Uniquely formulated self-lubricated planetary gear system
High impact UV resistant polymer plastic for strength and long life
The one piece moulded spool is self-insulated. Reinforced mag wheel fins provides spool strength
Includes wire tape guide & insulated handle
200m / 656ft of 12mm Polytape
Premium 3:1 Geared Reel (spool rotates 3 turns to 1 handle rotation)
Patented Reel Stabiliser – locks & balances the reel to the fence wire
Uniquely formulated self-lubricated planetary gear system
High-impact UV resistant polymer plastic fo strength and long life
The one-piece moulded spool is self insulated. Reinforced mag wheel fins provides spool strength
Includes wire tape guide & insulated yellow handle
500m / 1640ft of 6 strand Polywire
Four handles – can be operated by 2 people simultaneously.
Reduced transfer of shock back through the handles to operator’s hands
Inside diameter 150mm (6″) nominal
800mm Length (31 1/2″)
Weight 31kg
Insulator adapter clip
For use with 40mm Horse Tape
Galvanised spring steel design
Mounts to Joule Shield woodpost and steelpost pinlock insulator (sold separately)
25 pack
Galvanized Electric Fence Tape Buckle
For Use with Strainrite Electric Fence Tape
Bag of 10
Orange Spring Gate Break Handle
Electric Fence Activator & Termination End Insulators.
UV Stabilized 40mm (1 37/64″) Horse Tape
Galvanized Electric Fence Tape Buckle
100m (328′)
Resistance -1300 ohms/km (40mm tape)
UV Stabilised horse/gate tape
10 Heavy-duty 0.22mm Diameter stainless steel wires
Adjustable electric bungy cord
UV Resistant Polyester cover for maximum performance and long service life
1 Metre Length, 6mm “Solcor Shock” Solid Rubber Inner Core – specially formulated to resist UV deterioration.
Polymer hook attachment – Solcor fittings and accessories are manufactured from UV resistant Polymer.
User-friendly – no sharp edges. Fittings specially designed for safety and won’t scratch painted surfaces etc.
Galvanized spring steel 7mm (9/32″) diameter shaft
Galvanized pressed formed steel foot, proven superior ground holding and considered one of the best on the market
Enhanced Corrosion protection for increased durability
Extra overall length – 1040mm (41″)
Out of ground height – 840mm (33″)
Bundle of 10 posts
Commonly used during lamb tail docking season. The Strainrite Tailing Scrim provide an easy to use way to keep lambs and other animals penned temporarily. Generally used with a hessian roll that is very quiet in wind.
Adjustable locking hook.
The top of shaft crimped to stop hook falling off.
Galvanised spring steel shaft
Galvanised pressed formed foot, proven superior gound holding and considered one of the best on the market
Overall Length 1365mm (53″)
Out of ground height 1170mm (46″)
Length from base of shaft to top of foot – 195mm
Length from scrim hook to top of shaft – 25mm
Bundle of 10 posts
Insulator adapter clip
For use with 85mm Horse Tape
Galvanised spring steel design
Mounts to Joule Shield woodpost or steelpost Pinlock Insulator (sold separately)
25 pack
100 metres (328′)
UV Stabilised Horse/Gate Tape
10 Heavy Duty 0.22mm Diameter Stainless Steel Wires
85mm Resistance – 40 ohms per km
Adjustable electric bungy cord
UV resistant polyester cover for maximum performance and long service life
1 Metre Length, 8mm “Solcor Shock” Solid Rubber Inner Core – specially formulated to resist UV deterioration.
Polymer hook attachment – Solcor fittings and accessories are manufactured from UV resistant Polymer.
Can be adjusted to any length between 10-90 cms (100-900 mm). Solcor’s locking clip keeps the excess cord secured away.
User friendly – no sharp edges. Fittings specially designed for safety and won’t scratch painted surfaces etc.
Quality Runrite mutton swivel hook/gambrel assembly
9.5mm (3/8″) Stainless Steel
Built tough to last
Smooth surface finish for easier cleaning
Netting fence strainer board
Press formed steel – 900mm (35″)
Compatible with most mesh, hinged & ring joint netting
Features the threaded clamp design
Press formed steel strainer board (Board only)
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Overall Height – 900mm (35″)
Galvanised Finish
Design press formed steel strainer boards
Compatible with most mesh,hinged & ring joint netting
Features the Threaded clamp design
Galvanised finish
Set includes
2 x 900mm (35″) Threaded Strainer Boards
2 x Hook Type Boundary Strainers
Design press formed steel strainer boards
Galvanised finish
Compatible with most mesh, hinged & ring joint netting
Features the Wedge clamp design
Set includes
2 x 900mm (35″) Wedge Boards
2 x Hook Type Boundary Strainers
Premium quality NZ made fencing spade
Tough Heat Treated Steel Blade
Additional tube in shaft for increased strength & balance
Slightly rounded spade mouth and solid handle
Shaft Diameter 33mm
Overall Length 1420mm (56″)
Spade Head Width 170mm (7″)
Spade Head Height 240mm (9.6″)
Premium quality NZ made fencing spade
Tough Heat Treated Steel Blade
Additional tube in shaft for increased strength & balance
Slightly rounded spade mouth & solid handle
Spade Head Width 170mm (7″)
Shaft Diameter 33mm
Spade Head Height 240mm (9.5″)
Overall Length 1220mm (48″)
International Innovations Award-winning new system for electric gate activators
Unique revolutionary post termination insulator
Enables multiple gate handle connections
Eliminates protruding activator plates
Pack of 10 Activator Straps
Includes 30 x Galvanised Clout Nails
Saves time and money with single strap installation
Multi-function Post Insulator
Eliminates auxiliary components such as the egg insulator, pin lock
insulator, activator plate and separate electrical lead. Acts as an end insulator too.
Reduces potential harm to your stock
With no protruding parts or steel plates, there is nothing for the stock
to damage compared with common activator plate systems.
Time saving
Time saved on installation with only the Activator strap required to
install and less likely to be broken by stock or machinery.
International Innovations Award Winner
This award recognises global leaders in agricultural innovation. Entries
from as far afield as Russia and the UK compete for this coveted award.
Compact, Fully Collapsible Design.
Adjustable Wire Guide Fingers.
Self Regulating Friction Hub to prevent Jenny Overrun.
Gold zinc plating for increased corrosion protection.
Comes with ground spike – stand available as optional extra
A truly hands-free batten holder that attaches quickly and easily.
Built tough to last
Adjustable for all common batten sizes.
Gold passivated for increased corrosion protection.
The Pet energizer is designed to keep pets out of specific areas such as flowerbeds, vegetable gardens and refuse areas. Also a great option for a backing gate.
Powers up to 3km
2ha Hectares
5ac Acres
0.3J Output Energy
0.5J Store Energy
7.5kV Max Voltage
Mains power adaptor (Included)
Mounting options (wall, fence wire or wood post)
Robust weather-resistant system
Lightning protection
100Ah battery or greater recommended
Click Here for the Agri Energizer Catalogue
Up to 5km
Output Energy 0.5J
Stored Energy 0.8J
Max Voltage 8.5kV
2.8 hectares / 7 acres
APT: Adaptive Power Technology
Powers up to 5km of fence
Robust weather-resistant system
Battery charge state indicator
Energizer overload indicator
Day/night sensor
Powered by battery or mains power adaptor
Adaptable mounting options (wall, fence wire or wooden post)
Lightning protection
Many programmable options via the LCD handheld remote (optional accessory) including adjustment of fence voltage and pulse rate, independent day/night setting, battery voltage reporting and fence performance monitoring.
Agri Energizer Catalogue