Showing 121–160 of 340 results

Electric Fence Polywire – 200m

  • 15 strand HDPE UV stabilised Polywire
  • 9 strand Stainless steel 0.155mm diameter wires
  • A resistance of 4200 OHM/Km
  • 2mm thickness
  • High visibility and strength
  • New Zealand Made
  • Colour White
  • 200m / 650ft

Electric Fence Polywire – 500m

  • 15 strand HDPE UV stabilised Polywire
  • 9 strand Stainless steel 0.155mm diameter wires
  • A resistance of 4200 OHM/Km
  • 2mm thickness
  • High visibility and strength
  • New Zealand Made
  • Colour White
  • 500m / 1640ft

Electric Fence Warning Signs – Pack Of 10

  • Double sided with permanent print
  • UV stabilised molding
  • In accordance with the Australian/New Zealand standards
  • Pack of 10

Endurance Pivot Crossing Ladder Kit

Used vertically to install the collapsible ladder kit. you cut down the 1m poly pipe to the correct spacing of you fence wire. See Diagram image below.

  • 20 x 1m, 1/2 Nominal Bore Poly Pipes
  • 1 x 50m roll Bayco wire
  • 20 x “D” shackles
  • 20 x 5mm crimp sleeves
  • 1 kit does 10 crossings

Endurance Pivot Pipe – Pack of 10

Used horizontally across the wire with predrilled holes to line up the Endurance Kit (Sold separately)

  • 10 x 1.5m, 3/4 Nominal Bore Predrill Poly Pipes
  • UV Stabilised for long service life
  • Use with the Endurance Pivot Crossing Ladder Kit
  • Pack of 10

EzeCrimp 3in1 Fencing Tool

The original EzeCrimp crimping and electric fencing tool for wire cutting, wire stripping and wire joining.

  • Hardened cutlery grade steel jaws
  • Lightweight and compact
  • Comfortable rubber grips
  • Strong double action with over-centre lever for superior strength crimps

Compatible with Strainrite Crimp sleeves Only

  • 2.50mm Crimp Sleeves
  • 3.15mm Crimp Sleeves
  • 4.00mm Crimp Sleeves
  • 5.00mm Crimp Sleeves
  • Electric Crimp Sleeves
  • Barbed Wire Crimp Sleeves

Note: Using 3rd party crimp sleeves will void your tools warranty

EZEPULL INSTRUCTIONS & MAINTENANCE

Ezecut Fencers Chisel

  • Contractors Choice High-Quality Fencing Chisel
  • Forged from Solid High Carbon Steel
  • 37mm Head
  • Surface Ground and Whetstone Sharpened.

Maintain your Ezecut Fencers Chisel by cleaning up / grinding the strike point on the handle removing any ragged edges.
Never use a chisel whose head has been allowed to mushroom. striking the chisel in this condition could harm you, or others with chips of metal flying off the handle.

EzeMate Chain Diverter

  • Easily fitted to any chain strainer
  • Unbreakable Galvanized Steel Construction
  • Create room to work & prevent tool damage

EzePull 4in1 Fencing Tool

The original EzePull fencing tool for staple pulling, wire cutting, wire stripping and wire joining.

  • Hardened cutlery grade steel jaws
  • Lightweight and compact
  • Comfortable rubber grips
  • Strong double action with over-centre lever for superior strength crimps

Compatible with Strainrite Crimp sleeves ONLY

  • 2.50mm Crimp Sleeves Only

Note: Using 3rd party crimp sleeves will void your tools warranty

EZEPULL INSTRUCTIONS & MAINTENANCE

Fastlok Wire Joiners – Pottle of 20

  • For 2.50mm (12 1/2 gauge) High Tensile Wire
  • No tools required
  • Reusable
  • Pottle of 20

Fault Finder

  • Shows peak voltage, current and direction to fault in all-electric fences.
  • No second connection required.
  • Simply uses the capacitance of the user’s hand.

Fence Light: Stainless Steel – Blue

• Indicates power on the fence for peace of mind
• Visible from up to 1km at night and 100m during the day
• No batteries required
• Uses minimal power from the fence
• The frequency of the flashing LEDs indicates the amount of energy on the fence. The longer the period between flashes, the lower the voltage on the fence
• Highly visible LEDs allow for a 160-degree viewing angle. This allows the light to shine into the secure area only
• Can operate from 0.9kV to 12kV
• Can be used with most electric fence energizers
• Waterproof IP66
• Grade 316 stainless steel wire for coastal and corrosive environments

Fence Scope

  • The Fence Scope is a 4 in 1 tool, which helps diagnose problems on your fence to optimize electric fence installation and ensure that the fence continues to operate at ideal levels.
  • Fence Probe mode: quickly indicates the direction of a fence fault, showing the voltage and current.
  • Fence energy mode: accurately measures the true output energy along the fence.
  • Fence scope mode –this can record and display wave forms of the electric fence pulse. Distortions in the wave form (wave shape) generally indicate that there are fence faults.
  • Fence noise mode: assists in finding cracked or broken insulators, sparks and shorts along the fence.
  • Optional Pouch, great for keeping your Fence Scope clean & dry – FEA000160

Fence Scope Pouch

  • Pouch for Fence Scope – FEA00150
  • Hard wearing & durable pouch
  • Loop on the back so can be attached to belt

Fencer’s Crowbar

  • Length 1.8M (70″)
  • 22mm in diameter
  • Ideal for digging, levering and loosening the soil in holes and trenches.
  • Hot Forged & Heat Treated Spring Steel Crowbar
  • Offset flat chisel end enables greater control
  • Ideal weight & balance for sustained use
  • Colour RED

Fencing Outrigger (Wire Only) – Bundle of 25

  • Fits Steel Post Pinlock or White Porcelain Insulators
  • Simply attaches to existing fencing.
  • Positively located in both the horizontal and vertical direction
  • Prolongs the life and reduces pressure on new and existing fences

Flood Gate Controller

  • The flood gate controller limits energy on a section of fence in areas where flooding or heavy growth occurs.
  • Prevents fence from shorting
  • Reduces power loss when flood water contacts the electric fence line

Flood Isolator

  • Reduces power loss when flood water contacts the electric fence line
  • Eliminates fence short outs.
  • Sealed from insect and water damage

FX2 Contractor Chain Strainer – Fixed Handle

  • FX2 Fixed Handle Contractor Chain Strainer
  • Improved casting design for effective grip on wire
  • Solid, one-piece contractor Handle, 21mm (13/16″) Diameter
  • Smaller size handle – ideal for frequent/contractor use
  • Computer Designed Geometry
  • Strain fence wires quickly & easily

FX2 Contractor Chain Strainer Swivel Grab

  • FX2 Fixed Handle Contractor Chain Strainer
  • Improved casting design for effective grip on wire
  • Solid, one-piece contractor Handle of 22mm (7/8″) diameter
  • Smaller size handle – ideal for frequent/contractor use
  • Computer Designed Geometry
  • Strain fence wires quickly & easily
  • Two swivel ends for left/right-hand use
  • Spring Kit and 1.2m (47″) chain included

G3 Orchard Wire

  • MADE TO ORDER
  • Premium Quality Leader Wire
  • UV Stabilized Polymer coating
  • High Tensile Zinc-Aluminium coated 2.5mm inner wire
  • Provides vital abrasion wound protection for Kiwifruit vines
  • Minimum Breaking Load 620kg
  • Proudly NZ Made

Gate Break Handles – Spring ONLY

  • Replacement internal spring for the Spring gate break handles
  • Sold individually can be fitted to any Strainrite gate break handle

Gudgeon Guide

Well Hung Gates Everytime
Easily lines up against your fence post, acting as a jig. The guide allows your drill to make perfect gudgeon holes, set in the right place every time. Perfect for novices through to contractors.

Free up your hands
Using the chain hook to support the top guide and the adjustable bungee for the bottom guide, we give you the flexibility to free up both hands to install the chain clamps, allowing you to set your gate height in position with ease.

New Zealand Made
Proudly 100% New Zealand designed and manufactured, ensuring you get the Strainrite Quality every time.

FGG00030 – Gudgeon Guide

Harpoon 55mm Winged Ground Anchor

  • Fast installation with mechanical post drivers
  • Provides immediate high load capacity
  • Suitable for a range of soil conditions
  • Suits organic compliant application
  • Tie rod length 1200mm (47″)

Harpoon Ground Anchor

  • Fast installation with a mechanical post driver
  • Provides immediate high load carrying capacity
  • Designed for use in tough rocky ground
  • Ideal for use in vineyards using Klima cane pruning equipment
  • Patent Pending

Heavy Duty Post Chisel

  • General Purpose Fencing Chisel
  • Forged from Solid High Carbon Steel
  • 45mm (1 3/4″) Head
  • Milled Cutting Edge

Heavy Duty Stay Holder

  • Quality Heavy Duty Strainrite HD Stay Holder
  • Manufactured from Heavy Gauge Galvanized Steel
  • Gold Passivated for increased corrosion protection
  • Suitable for angle/horizontal rails
  • Also avaliable in boxes of 25 FFP00045

Helix Wire Winding Jenny

  • Easily wind up old fence wire! Allows efficient vertical wire winding without bending over.
  • Quick release rotor for easy coil removal.
  • Recovered wire coil fits wire dispensing jenny for re-use.
  • Integral ground stand allows jenny to be used to dispense wire from the ground.
  • Rugged steel contruction, gold passivated for corrosion protection.
  • Stability wings for ground use.

Hi Strain Insul-Clip Wire Strainer

  • Frame designed to maximise spark distance
  • Easy to operate upside down
  • Specially moulded insulator nests within the frame to achieve high tensile strainer strength.
  • Proudly NZ Made

Hi Test Insul Strainer Box of 18

  • For high voltage fence installations
  • Integrated strainer & insulator assembly combines high performance with strength
  • Includes integral power wire connection terminal
  • Design allows fence re-tensioning without the need to disconnect joint clamps

High Conductive Ally Clad Cable

  • Strainrite’s 2.6mm (7/64”) Aluminium clad wire has 4 times the conductivity of standard galvanized wire, meaning high power transmission with minimal loss
  • Now features 8.3mm (21/64”) extra heavy duty double coated red LDPE Polyethylene sheathing
  • Low resistance 8ohms / 1000m (3280’)

High Conductive Aluminium Coated Wire

  • Strainrite’s 2.6mm (7/64”) Aluminium clad wire has 4 times the conductivity of standard galv wire, meaning high power transmission with minimal loss.
  • Low resistance 8ohms/ 1000m (3280’)

Holeshot Staple Guide

The Holeshot is a muzzle attachment for your staple gun, which is perfectly designed to fit all Strainrite insulators for fast and effective installation on a wood post.

  • Fits the Stockade ST400i & ST400
  • Requires 2.5mm Allen key

FIN00500 Holeshot Info

Horse Hot Tape Post – Bundle of 10

  • Galvanized Spring Steel 6.9mm diameter shaft
  • Gold Foot – Gold passivated for corrosion protection.
  • Out of Ground Height – 1027mm
  • Overall Length 1250mm
  • Bundle of 10

Horse Sighter Wire – 300M

  • Galvanized 4mm Mild Steel Wire
  • Coated with white UV Stabilized LDPE
  • Ideal for fencing off horse paddocks
  • 300M Hank

Hot Gate

  • Allows convenient access option for poultry pens without energizer disconnection
  • Ties into existing poultry nets
  • One hand operation

HOTPOST DURA-TOP Tangle Free – Bundle of 5

  • The Duratop head is designed to reduce tangling & eliminate wear
  • Uniquely designed hot dipped galvanised pressed steel foot
  • Extra overall length – 1040mm / Out of ground height 850mm
  • The shaft becomes live down to the bottom insulator.
  • Bundle of 5