Showing 81–120 of 340 results

Contractor Quad Jenny Trailer

Enables efficient simultaneous dispensing of 4 wires.  Designed for efficient commercial applications.

Vineyard Model Wire Jenny Rotors
Four Twin Roller Bearing Assembly & cast hub with adjustable friction nut.

Swing Over Arm Design
Features swing arm design for easy individual rotor reloading. Designed for dispensing 1000m Coils in all conditions.

Trailer Towbar Attachment
Easily attaches to Farm Quads and can be hooked up to multiple Jenny Trailer Systems.  Can be coupled with a second Jenny trailer for 8 wire dispensing.

Galvanised Steel Construction
Hot dipped galvanized steel for enhanced corrosion protection and increased durability for a longer service life.

New Zealand Made
Proudly 100% New Zealand designed and manufactured, ensuring leading technology and premium quality.

Dimensions (Approximately)
2020mm Length
1420mm Width
1260mm Height

FTJ00010 – Trailer Quad Jenny System

Contractor Single Wire Jenny

The Strainrite Contractor range of Jennys feature trailer taper roller bearing hubs, and heavy steel construction designed to outlast other Jenny designs in commercial use.

  • New arm design allows for easy uncoiling and centering of fence wire
  • Twin roller bearing assembly & cast hub with adjustable friction nut.
  • swing arm design for easy individual rotor reloading.
  • Rugged stand construction allowing many options for mounting.

Includes:
1 x Contractor Jenny Stand
1 x Contractor Model Wire Jenny Rotor – (FWJ00100)

Contractor Wire Jenny Rotor

  • Replacement Rotor for Contractor Jennys Only
  • New arm design allows for easy uncoiling and centering of fence wire
  • Twin roller bearing assembly & cast hub with adjustable friction nut.
  • swing arm design for easy individual rotor reloading.
  • Designed for dispensing 1000M (3280ft) Coils in all conditions.
  • Including Axle and Bearing assembly

Crimp Sleeves 2.5mm – Container of 1000

  • 2.5mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 1.6mm to 2.5mm fencing wire
  • Container of 1000

Crimp Sleeves 2.5mm – pottle of 100

  • 2.5mm Wire Crimp Sleeves
  • Water resistant grit adhesive for all weather application.
  • For use on 1.6mm to 2.5mm fencing wire.
  • Pottle of 100

Crimp Sleeves 2.5mm – Pottle of 500

  • 2.5mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 1.6mm to 2.5mm fencing wire
  • Pottle of 500

Crimp Sleeves 3.15mm – Container of 1000

  • 3.15mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 3.15mm or 10 gauge and 1.6mm High Tensile Barbed Wire
  • Container of 1000

Crimp Sleeves 3.15mm – Pail of 500

  • 3.15mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 3.15mm or 10 gauge and 1.6mm High Tensile Barbed Wire
  • Pail of 500

Crimp Sleeves 3.15mm – Pottle of 50

  • 3.15mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 3.15mm or 10 gauge and 1.6mm High Tensile Barbed Wire
  • Pottle of 50

Crimp Sleeves 4.00mm – Container of 1000

  • 4.00mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 3.55mm to 4.0mm (9 to 8 gauge) Fencing Wire and 2.0mm High Tensile Barbed Wire
  • Container of 1000

Crimp Sleeves 4.00mm – Pottle of 50

  • 4.00mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 3.55mm to 4.0mm (9 to 8 gauge) Fencing Wire and 2.0mm High Tensile Barbed Wire
  • Pottle of 50

Crimp Sleeves 5.00mm – Container of 1000

  • 5.00mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 7 gauge Wire and 2.5mm (12 gauge) Mild Steel Barbed Wire
  • Container of 1000

Crimp Sleeves 5.00mm – Pottle of 50

  • 5.00mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 7 gauge wire and 2.5mm (12 gauge) Mild Steel Barbed Wire
  • Pottle of 50

Crimp Sleeves 5.00mm – Pottle of 500

  • 5.00mm Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 7 gauge Wire and 2.5mm (12 gauge) Mild Steel Barbed Wire
  • Pottle of 500

Crimp Sleeves Barbed Wire – Pottle of 50

  • Barbed Wire Crimp Sleeves
  • Water Resistant Grit Adhesive for all weather application
  • For use on 2.50mm (12 gauge) Mild Steel Barbed Fencing Wire
  • Pottle of 50

Crimp Sleeves Electric – Container of 1000

  • 2.5mm Electric Crimp sleeves
  • For use on 1.6mm to 2.7mm (16 to 12.5 gauge) Fencing Wire
  • Crimp 4-5 times with Eze-Crimp or Ultra-Crimp Fencing Tool to ensure joint strength
  • Container of 1000

Crimp Sleeves Electric – Pottle of 50

  • 2.5mm Electric Crimp Sleeves
  • For use on 1.6mm to 2.7mm (16 to 12.5 gauge) Fence Wire
  • Crimp 4-5 times with EzeCrimp or UltraCrimp Fencing Tool to ensure joint strength
  • Pottle of 50

Cut Out Switch – Box of 10

  • Quality Strainrite Cut Out Switch
  • Simple operation & Isolation of permanent electric fences
  • On/Off status easily seen from a distance

Digital Volt Meter

  • Digital self-earthing tester for accurate kV reading
  • Reads up to 10kV
  • Accurate digital display
  • For use on all electric fencing systems
  • Runs on 1 x CR2032 battery

Double Digger

  • Cuts digging time in half
  • Slightly tapered hardwood handles.
  • Stainless Steel Blades
  • Overall Length 1800mm (70″)

Double Handle Bungee Gate Break Kit 11M

The Strainrite Double Handle Brianex Bungee Gate break Kit with Orange Brianex Bungee Gate Break Handle for up to 11m Gateways

11M Double Handle Gate Break Kit Contains:

  • 2 x Strainrite Activator Kits
  • 2 x Strainrite Brianex Bungee Connector Clips
  • 1 x Solcor 8m Monocore Electric Bungee Cord
  • 2 x Orange Bungee Handles

Double Stacker 4 Arm Jenny Spike

  • As supplied with the Double Stacker 4 Arm Jenny FWJ00162
  • Overall length of 640mm

Double Stacker 4 Arm Wire Jenny

  • Galvanized for long term corrosion protection.
  • Quick Adjust Wire Guide Fingers, 12mm (1/2″) diameter for extra strength.
  • Self-Regulating Friction Hub to prevent wire overrun.
  • Also with convenient handle for re-coiling used wire.
  • Includes extra long ground spike.

Double Stacker Titan Jenny Spike

  • As supplied with the Double Stacker Titan Jenny FWJ00172
  • 19mm diameter shaft
  • Overall length of 812mm
  • The length between brake washer & ground washer 150mm
Placeholder

Double Stacker Titan Jenny Stand

  • Optional stand for the Double Stacker Titan Jenny
  • Ideal for all types of terrain
  • Collapsible for easy transport

Drop Pin Wire Strainer

We are proud to be the only NZ manufacturer of permanent wire strainers

  • Traditional ratchet and pawl mechanism
  • The pin can be locked out for freewheel action
  • Oval hole in the spool for joining two wires
  • Ability to thread onto wire = less joins
  • Proudly NZ Made

Druid 130km Energizer

  • Up to 130km
  • Output Energy 13.8J
  • Stored Energy 21J
  • Max Voltage 9kV
  • 82 hectares
  • 200 acres
  • APT: Adaptive Power Technology
  • An ideal choice for long-distance parallel electric fencing systems
  • Built-in alarm monitors faults on the high voltage and earth fence wires
  • Lightning and power surge protection
  • Easy-to-use tag included for controlling the energizer
  • The LCD background colour changes to fence condition
  • Powered by 240V mains includes a built-in battery for back-up
  • Optional keypad for controlling and programming the energizer – FEN00491

Click Here for the Agri Energizer Catalogue

 

Druid Keypad

  • Druid Optional Keypad
  • For controlling and programming Druid Energizer – FEN00490

Dunkit Pigtail Caddy

  • Carries approx. 25 Pigtail Standards
  • Reduces tangling of pig-tail posts
  • Allows hands-free operation of Fence tape reels
  • Proudly Manufactured in NZ by Strainrite Fencing Systems

Duratop Hotpost Multiwire – Bundle of 5

  • The Duratop head is designed to reduce tangling & eliminate wear
  • Uniquely designed hot dipped galvanised pressed steel foot.
  • Power redistributes through the spring steel shaft and clips, repowering broken wires via a parallel live wire
  • Bundle of 5

Duratop Pigtails 6mmx1040mm – Bundle of 10

  • The Duratop head is designed to reduce tangling & eliminate wear
  • Uniquely designed hot dipped galvanised pressed steel foot
  • Solves common failures related to pigtail posts
  • Revolutionary new pigtail range

Duratop Pigtails 6mmx940mm – Bundle of 10

  • The Dura-top head is designed to reduce tangling & eliminate wear
  • Uniquely designed hot dipped galvanised pressed steel foot
  • Solves common failures related to pigtail posts
  • Revolutionary new pigtail range

Duratop Pigtails 7mmx1040mm – Bundle of 10

  • The Duratop head is designed to reduce tangling & eliminate wear
  • Uniquely designed hot dipped galvanised pressed steel foot
  • Solves common failures related to pigtail posts
  • Revolutionary new pigtail range

Earth Stake

  • Profile design for ultimate surface to ground contact
  • Multiwire aluminium clamp system
  • Overall length 2M
  • Width 30.4mm

Earth Stake Advice

Earthing ground rod requirements: Approx 1 x 2m long galvanised ground rod for each 5j of energizer energy (minimum of 1).

(Earth rods should be installed at least 10m away from any mains earth, power supply or telephone cables)

* Distance figures stated are maximum single wire (km) effective performance for multiwire distance will be affected by fence.

Easy Wire Puller

  • Easily tie off/staple wire hands free!
  • Quick and easily tensions either fencing or netting wire around strainer posts
  • Smooth grip wire clamp prevents wire damage
  • Overall length approx 678mm (26″)
  • Handle Pipe Diameter 25.4mm

Electric Fence Activator Kit – Bag Of 10

  • Quick & Easy Gateway Solution
  • Premium Performance Joule Shield Wood Post Pinlock Insulator
  • Manufactured from corrosion resistant polymer for strength and long life
  • Simply clamp activator plate to underground cable
  • Multiple Hook Up Options